SuperATV's 3in Lift Kit is for the Ranger XP, 2017 through 2026 — and only that machine

If you run a Ranger XP built between 2017 and 2026, the SuperATV 3in Lift Kit is listed to fit your machine. That is the whole of the fitment claim, and it is worth reading closely: the kit is matched to the RANGER-XP platform across those model years. Nothing here says it fits an earlier Ranger, a mid-size Ranger, or any other Polaris chassis. If your UTV is a 2016 or older, or a different model line, this kit is not listed for it — do not assume the bolt pattern or the geometry carries over just because the badge reads Ranger.

What a 3-inch lift buys you is clearance. More room between the chassis and the ground, and more room in the wheel wells for a taller tire. If you have been dragging the belly over rocks or packing mud into the wells on a trail run, that is the problem this kit is built to address. It raises the body of the machine to open up both.

A few things this brief will not do, by policy and for your safety. We will not quote you a torque value for the lift hardware, a ride height figure, or any spring specification. Those numbers belong in SuperATV's install instructions and your Ranger's service manual, and they are specific to the kit and the machine. A lift kit puts load through suspension mounts and fasteners; a bolt torqued by guesswork can back out on the trail or shear under impact, and either one can drop a corner of the machine while you are moving. Use the documented values, not a number from memory.

Fitting a lift also changes what the rest of the machine is doing. Taller tires and a raised center of gravity affect how the Ranger steers, brakes, and leans. Plan the tire and wheel choice around the new clearance rather than buying the biggest tire you can find, and re-check your alignment and any CV angles after the install settles. If you tow or haul in the bed, understand that the geometry has moved.

Bottom line: for a 2017–2026 Ranger XP that needs clearance for bigger rubber and rougher ground, the SuperATV 3in Lift Kit is a listed fit. For anything outside that model and those years, it is not — check the fitment before you buy, and follow the manual's torque and setup figures when you install it.