Seven new suspension kits land, each locked to a specific platform and model-year range
Fresh shock and lift options for seven machines — match the model years before you buy, because a kit built for one year does not automatically fit the next.
What verifiers say
No verifier has attested to this piece yet.
Seven suspension products have arrived in the New products section, and each one is tied to a single platform and a defined model-year window. The compatibility below is the only fitment we can stand behind. If your machine's year falls outside the listed range, treat the kit as not confirmed for your vehicle — a part listed for a later year does not necessarily bolt to an earlier one, and the reverse is just as true.
For the N300, the Bilstein 5100 Series Shock Set covers model years 2016 through 2023. If your N300 is a 2024 or newer, this set is not confirmed for it.
JL owners get the Fox 2.0 Performance Series IFP Shocks, listed for 2018 through 2026.
The Icon Vehicle Dynamics Stage 2 Suspension System is for the U725, model years 2021 through 2026.
RAPTOR runs get the widest window here: the King Shocks 3.0 Bypass Shock Kit is listed for 2010 through 2026. Even so, confirm your exact year before ordering.
For side-by-side owners, the SuperATV 3in Lift Kit fits the RANGER-XP from 2017 through 2026.
Two Rough Country kits round out the list. The 2.5in Leveling Lift Kit is for the ZR2, 2017 through 2022 — note that it stops at 2022, so a 2023 or later ZR2 is not covered. The 3.5in Suspension Lift is for the JK, 2007 through 2018.
A word on what we are not going to print. We will not give you a torque value for a shock bolt, a fluid capacity for an IFP shock, a ride-height figure, or a spring rate. Those numbers live in the service manual for your specific machine, and they are there for a reason. A suspension fastener torqued by guesswork can back out on the trail or shear under load; a shock filled to the wrong level will not damp the way it was designed to. Use the manual that matches your year and model, and torque every fastener to the figure it specifies.
Changing shocks or installing a lift alters how your machine sits, steers and stops. After any install, recheck alignment and fastener torque per the manual, and keep your protective equipment on for the shakedown. If your year falls outside a kit's listed range, ask before you buy rather than assuming it carries over.
Fitment in this piece was checked against 6 catalog entries at the time of writing. Confirm with the supplier before buying or installing.
Nothing here replaces your service manual. Torque values, capacities and pressures must come from the manufacturer's published data for your exact machine.
Related
A direct-fit damper swap for Wrangler JL owners who want more composure on washboard and rock without touching springs or ride height.
The OffRoading.News Desk · 8 hours ago
A batch of fresh suspension, tire, wheel and armor parts landed this week; this is the fitment, model years included, so you buy once.
The OffRoading.News Desk · 1 day ago
The latest KO3 all-terrain is on the fitment list for Wrangler JL model years 2018 through 2026, and nothing else on the sheet in front of me.
The OffRoading.News Desk · 1 day ago